Parking automatic vending machine IC/ RF card dispenser with read write function

Product Introduction

It is a classical mechatronics product, which has become into industrial standard actually. Its usability and reliability get from customers’ long time suggestion and manufacturer’s improvement and accumulation. TCD card machine is mainly used in parking entrance card dispenser, phone card automatic vending machine, ticket vending machine, all kinds of smart card vending and so on.

Main technical data

• Operating voltage: 24VDC (max current 2A, static current 0.1A)
• Operating temperature: -20℃ to 65℃
• Operating humidity: 30-90% (comparatively)
• Use condition: install in bin
• Card available: Width: 54±0.5mm           Length: 85±0.5mm       Thickness: 0.3-2.5mm (adjustable)(0.8mm is default)
• Card material: Paper or Polyester card
• Net weight of card dispenser: 2.0kg (including the briquette)
• Time of issuing: max0.5s
• Capacity of stacker: 150pcs (0.8mm), 100pcs available when an extra stacker is needed

Main characteristics

1 Industrial design, adjust to high temperature and other bad environments;
2 Simulated manpower friction card issuers , better adaptability to various deformed cards;
3 Watchdog of hardware and embedded operating system to ensure properly running;
4 Pre-dispense function accelerate dispensing speed;
5 Connectable with the vehicle detector to achieve card issuing and “one car, one card”;
6 Automatic buzzer alarm when no cards, fewer cards or failure.
7 Provide both RS232 and I/O voltage control interface;
8 Automatic buzzer alarm when errors occur, automatic reset after 100 seconds alarm;
9 Capacity of card stacker is more than 40pcs, automatic buzzer alarm when the withdrawing stacker is full;
10 Slide card stacker with a capacity of 40pc;
11 Adjustable of card stacker with a capacity of 120pc each;
12 Automatic withdrawal to prevent card lost (only for TCD800F series
13 Slide design to make installation and disassembling easier;
14 Molded production to ensure high consistency of precision and quality.

Control Interface

This dispenser provides both I/O and RS232 interface of power level. PWL control interface is led by standard 12pin (2.54mm) socket CN3of the control board, RS232 control interface is led by the standard 3pin (2.54mm) socket CN7.

Where card dispenser is applied to ?
The users will divided as VIP USER , monthly user , Temporary user . Authorized by software --assign cards to VIP user and monthly users .

Entry -- driver swiping card on the parking ticket machine --- barrier gate open --photo taken .

Exit ,the driver swipping card on ticket machine ---automatic calculate parking fee and charge it --- images contrast ---charge ---barrier gate open .

For Temporary user , Entry ----the driver press the button on ticket machine to get a card --- barrier gate open -- photo taken .

Exit , the driver give the card to the guard---- the guard will check payment ---paid-- correctly images contrast--- the guard open the barrier

Main application

Parking lot management system

Automatic vending machine system

Bank self-service open account card issue

Telecom and electric power business card issue

Park ticket vending system

Card initialization issue and sort

Subway or public transport card issue

Pictures for reference